2 Speed Screw Pile Torque Heads 5000-12000nm
Our Screw Pile Torque Heads, also called Anchor Drives, have been developed in conjunction with the leading screw anchor / helical pile installers around the world. The only true Screw Pile Torque Heads available - designed and manufactured inhouse with high grade quality material, specifically for the rigours of helical pier installations. The host machine will operate in the most efficient power range, minimising wear and tear, optimising performance, and ensuring highest returns. We provide solutions for skid steers and excavators of various makes and models including Kubota, Bobcat, Cat, JCB, Toyota, New Holland, Case, Komatsu, Kobelco, Takeuchi, New Holland, Terex, ASV and more.
WIDER RANGE OF APPLICATIONS
- Choose a 2 speed drive. It's like owning 2 drives in 1.
- Offers the best of both worlds: high speed when you need it for those tricky jobs and high torque allowing you to take on that slightly larger job with the same equipment
- Install both small and larger piles with just one drive unit
IMPROVED PRODUCTIVITY
- Use your drive with optimum RPM / Torque for various pile sizes
- Save time and maximize profits by installing smaller piers with more efficiency
- Begin with high speed / low torque
- Flick the switch to low speed, high torque to finish off
SIMPLE ELECTRICAL CONNECTION
- Simple 12 or 24 volt coil, just requires connection
- Optional joystick switches, floor mounted switches & cigarette plugs available pre-wired to suit
| PDT4HF | PDT6HF | PDT8HF | PDT10HF | PDT12-SV | |
| Rec Flow Range | 30-150 lpm | 30-150 lpm | 30-200 lpm | 30-200 lpm | 30-200 lpm |
| Max Torque | 4673 Nm | 5758 Nm | 7881 Nm | 9916 Nm | 11531 Nm |
| Pressure Valve | Fitted | Fitted | Fitted | Fitted | Fitted |
| Energy Control Valve | N / A | N / A | N / A | N / A | Fitted |
| Max Pressure (Do Not Exceed) | 240 Bar @ 150 lpm | ||||
| Max Flow (Do Not Exceed) | 180 lpm @ 200 bar | ||||
| Max Power (Do Not Exceed) | 60 Kw (80 hp) | ||||
| Overall Length | 910 mm | 910 mm | 1042 mm | 1042 mm | 1042 mm |
| Diameter | 340 mm | 340 mm | 340 mm | 340 mm | 340 mm |
| Weight (No Frame/Hitch) | 134 kg | 146 kg | 165 kg | 165 kg | 165 kg |
| Std Output Shaft | 75 mm Square |
75 mm Square |
75 mm Square |
75 mm Square |
75 mm Square |
| Swing Control | Optional | Optional | Optional | Optional | Optional |
| Diggalign | Optional | Optional | Optional | Optional | Optional |
